DK-400 Clear Solvent Based Concrete Floor Polyurethane Gloss

Description

Concrete Floor Polyurethane Gloss Sealer – DuraKote Polyurethane DK 400™ SB

DK 400 polyurethane is a 2 component 51% solids, acrylic aliphatic polyurethane designed as a non-yellowing clear coating for interior concrete, cement-based overlays, or as a top finish coat on epoxy systems. The high-performance clear top coat generates the premier balance of strength added UV stability, flexibility, chemical and scratch resistance that is both user-friendly and extremely durable. As a vertical wall coating, it enhances anti-graffiti properties. DK 400 Polyurethane SB is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

• Surecrete DK 400 Polyurethane SB Specs
  Coverage – Approximately 300-400 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
  VOC Rating – less than 435 g/L
  Solids Content – 51%
  Pot Life – approximately 60 minutes
  Shelf Life – 1 year in original unopened container
  Ready for re-coat – 6-8 hours (18+ hours at low temperatures)
  Light Duty Use – 24 hours (Up to 48 hours at low temperatures)
  Heavy Traffic Ready – 3 days (Up to 5 days at low temperatures)
  Full Cure – 5-7 days (Up to 14 days at low temperatures)
  Appearance (cured) – Clear Gloss
  Appearance (wet) – Clear
  Water Resistance – Excellent, beads water
  Mechanical Stability – Excellent
  Light Stability – Excellent
  Mechanical Properties – Direct Impact – 30 inch/pounds; Reverse Impact – 6 inch/pounds
  Hardness – Pencil 4H, Konig 100
  Diluent – Hydrocarbons
  Odor – Solvent
  Application Temperature – 50 – 90 degrees Fahrenheit