DK-500 Clear Concrete Floor Epoxy 100% Solids

Description

Clear 100% Solids Epoxy Concrete Sealer DK 500™

DK 500™ Epoxy is a 2 component 100% solids, zero VOC floor coating system that is used in a wide variety of applications such as, high build clear coat for a host of decorative concrete systems, a primer coat and binder coat for Dura-Kote Flakes and Metallics. Yellowing and blush are minimized by the use of an aliphatic amine curing agent for part B, providing a premium, durable clear coating for colored or stained concrete and cement-based overlays. For unique, job-specific conditions, 2 other specialized part B’s are available, Premium and Premium Thin Viscosity (PTV). See your SureCrete distributor for details. The high performance, self-leveling characteristics generate the premier balance of strength, flexibility, and chemical resistance that is both user-friendly and extremely durable. DK 500 Epoxy is ideally suited for any commercial or residential setting: manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, gyms, locker rooms, stadiums, or anywhere that an exceedingly resilient floor is desired.

• Surecrete DK 500™ Epoxy Specs
  Coverage – 100-150 square feet per gallon per coat catalyzed product (varies widely based on application method)
  VOC Rating – 0 g/L Solids Content – 100%
  Shelf Life – 1 year in original unopened container
  Mixing Ratio – 2 parts A to 1 part B Pot Life – 10-20 minutes
  Ready for recoat – 6-8 hours (18+ hours at low temperatures)
  Light Duty Use – Approximately 16 hours (Up to 30 hours at low temperatures)
  Heavy Traffic Ready – Approximately 24 hours (Up to 3 days at low temperatures)
  Full Cure – 5-7 days (Up to 14 days at low temperatures)
  Appearance (cured) – High gloss sheen
  Appearance (wet) – Clear – Straw
  Color Water Resistance – Excellent, beads water
  Mechanical Stability – Excellent
  Light Stability – Yellows – Odor – Sweet
  Adhesion – 400 PSI (concrete failure)
  Abrasion Resistance (Tabor) – 1,000 gm. load @ 500 cycles = 31 mg loss
  Compressive Strength – 9,000 PSI
  Application Temperature – 50 – 90 degrees Fahrenheit