DK-120 Fast Cure Clear Polyaspartic Coating

Description

 67% Solids Clear Polyaspartic Coating DuraKote DK-120 2 Hour Fast Cure

SureCrete’s DK 120™ is a specially formulated 67% solids hybrid solvent based polyaspartic coating designed for application over interior concrete based overlays, or as a top finish coat on epoxy systems. DK 120 provides a low VOC (330 g/L), UV stable, penetrating, film forming, color enhancing, and high gloss wear surface. The high performance clear top coat generates the premier balance of strength, flexibility, chemical and scratch resistance. As a vertical wall coating, it enhances anti-graffiti properties. DK 120’s rapid cure time eliminates excessive waiting to return a floor to service. Unlike many polyaspartics, it has a user-friendly pot life of approximately 20 – 30 minutes. Turnaround time for a floor may be as little as 5 – 6 hours. It is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

• Surecrete Dura-Kote DK-120 Specs
  Coverage – Approximately 300-400 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
  VOC Rating – less than 330 g/L
  Solids Content – 67%
  Pot Life – approximately 30 minutes
  Shelf Life – 1 year in original unopened container
  Ready for re-coat – 1-2 hours (4-5 hours at low temperatures)
  Light Duty Use – 3-4 hours (24-36 hours at low temperatures)
  Heavy Traffic Ready – 24-36 hours (3-4 days at low temperatures)
  Full Cure – 1-2 days (Up to 7 days at low temperatures)
  Appearance (cured) – Clear Gloss
  Appearance (wet) – Clear
  Water Resistance – Excellent, beads water
  Mechanical Stability – Excellent
  Light Stability – Excellent
  Odor – Aromatic
  Application Temperature – 32 – 90 degrees Fahrenheit
  Gardener direct / Reverse impact – More than 160 inch pounds
  Taber Abrasion – 40-60 mg loss
  QUV – A – less than 5.0 at 2,000 hours
  Gloss Retention – More than 95% at 2,000 hours