DK-400 WB Clear Water Based Floor Polyurethane Gloss or Satin

Description

Water Based Polyurethane Clear Coat Top Coat, Satin or Gloss – DK 400 WB

DK 400 WB Polyurethane is a 2 component 57% solids, acrylic polyurethane designed as a non-yellowing clear coating for concrete, cement-based overlays, or as a top finish coat on epoxy systems. The high-performance clear top coat, available in gloss or satin finish, provides the durability of a solvent base system with the ease and safety of a low VOC (73 g/L) water-based system. Unlike nearly all polyurethanes, DK 400 WB Polyurethane has remarkable properties related to vapor permeability that permit its use in an exterior setting. Note: See paragraph 5 under Surface Prep. Generating the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance, it is both user-friendly and extremely durable. As a vertical wall coating, it enhances anti-graffiti properties. DK 400 WB is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

• Surecrete DK 400 WB Polyurethane Specs
  Coverage – Approximately 300-400 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
  VOC Rating – less than 72 g/L
  Solids Content – 57%
  Pot Life – approximately 30 minutes
  Shelf Life – 1 year in original unopened container
  Ready for recoat – 6-8 hours (18+ hours at low temperatures)
  Light Duty Use – 24 hours (Up to 48 hours at low temperatures)
  Heavy Traffic Ready – 3 days (Up to 5 days at low temperatures)
  Full Cure – 5-7 days (Up to 14 days at low temperatures)
  Appearance (cured) – Clear Gloss or Satin
  Appearance (wet) – Milky Liquid
  Water Resistance – Excellent, beads water
  Mechanical Stability – Excellent
  Light Stability – Excellent
  Diluent – Water
  Odor – Sweet Acrylic
  Application Temperature – 50 – 90 degrees Fahrenheit